EST12 (AC4598-12), 12-Circuit Slip Ring, Through Bore, under 50 Mbps
$1,704.00
SKU
SR-EST12
The EST Series electrical through bore slip ring is a rotating assembly used to transfer power, control circuits or data (analog / digital) from stationary inlets to rotating outlets.
EST Series slip rings feature a 1.5 inch [38.1 mm] through bore for shaft mounting and incorporate low-wear, fiber brush contacts that do not require lubrication producing virtually no wear debris. Standard models are available from 6 to 24 circuits.
For more information, see EST Series Electrical Slip Rings.
EST Series slip rings feature a 1.5 inch [38.1 mm] through bore for shaft mounting and incorporate low-wear, fiber brush contacts that do not require lubrication producing virtually no wear debris. Standard models are available from 6 to 24 circuits.
For more information, see EST Series Electrical Slip Rings.
Downloads | EST Series Catalog STEP [3D] |
---|---|
Dust / Water Protection | DSTI Slip Rings are designed with seals to help protect against dust, light splash and condensation. If your application requires additional protection, contact a member of our Sales Support Team to discuss options. |
Electrical Noise | 100 Milliohms (max.) |
Wire Gauge (AWG) / Material | 16 / Tin-Plated Copper |
Contact Material | Silver |
Voltage Rating | 600V |
Max. Data Speed | Under 50 Mbps [Non-Ethernet] |
Max. Speed | 250 RPM |
Lead Wire Length | 36" [914 mm] |
Capsule Length | 3.070" [78 mm] |
(Circuits) Amps | (12x) 10A |
Total Circuits | 12 |
Product Disclaimer | Values are dependent on a combination of all application parameters. Please note operational life is dependent upon both rotational speed, duty cycle and temperature. In order to successfully transfer digital data signals, a variety of conditions must be met. Please consult with DSTI for approval. For the most reliable transfer of digital data signals, see our Ethernet slip ring options. All electrical components (including electrical slip rings) are non-returnable. |